Online Articles by TrueGrid customers

Online Articles by TrueGrid^® users

DISCLAIMER

By providing links to other sites, XYZ Scientific Applications Inc.
does not guarantee, approve, or endorse the information or products
available at these sites, nor does a link indicate any association with
or endorsement by the linked site to truegrid.com.

FEA

Design, Simulation and Experimental Study of Shape Memory Alloy and Micro-motor Activated High Pressure Optical Cell for Bio-Physical Studies by Oliver Hongchun Xie

A study of localisation in dual phase high-strength steels under dynamic loading using digital image correlation and FE analysis by V. Tarigopula, O. S. Hopperstad, M. Langseth, A. H. Clausen and F. Hild

Optimization of shell buckling incorporating Karhunen-Loève-based geometrical imperfections by K. J. Craig and Nielen Stander in Structural and Multidisciplinary Optimization journal

A Pilot Probabilistic Risk Assessment Of a Dry Cask Storage System At a Nuclear Power Plan by A. Malliakos, NRC Project Manager, U.S. Nuclear Regulatory Commission

Effects of nanoscale film thickness on apparent stiffness of and cell-mediated strains in polymers. by Binu K. Oommen

Load impact on railway track due to unsupported sleepers by A Lundqvist, T Dahlberg

Modelling of Behaviour of Metals at High Strain Rates by VILI PANOV

Dynamisk interaktion mellan tag och rals by Johan Widstrand

Performance of W-Beam Splices by Malcolm H. Ray, Chuck A. Plaxico, Klas Engestrand

Computational analysis of impact of a bullet against the multilayer fabrics in LS-DYNA by Rimantas Barauskasa, and Ausra Abraitiene in International Journal of Impact Engineering Volume 34, Issue 7, July 2007, Pages 1286-1305.

Acoustic pressure load conversion method to vibration spectra by Rassaian; Mostafa, Lee; Jung-Chaun, Young; Gerould K., Landmann; Alan Edqar.

Nonlinear Seismic Analysis of Morrow Point Dam by Charles R. Noble, Larry K. Nuss

Variable force energy dissipater and decelerator by Ray; Malcolm H., Plaxico; Chuck A.

PENETRATING BUILDINGS IN URBAN OPERATIONS - TOWARDS WEAPONS DESIGN BY SIMULATION by M Hinton, S Gilbert, I Cullis, P Church, D Porter, T Andrews M Hamblin, B Proud, and A Pullen.

FINITE ELEMENT ANALYSIS OF BIRD STRIKES ON COMPOSITE AND GLASS PANELS by KOH CHEE CHUAN

Structural Analyses of the Storage Container for Heavy Element Facility by D.S. Ng

Mechanical Assessment of the Waste Package Subject to Vibratory Motion by DOE

Quantitative characterization of 96.5Sn3.5Ag and 80Au20Sn opticalfiber solder bond joints on silicon micro-optical bench substrates by Rassaian, M. and Beranek, M.W. in IEEE Transactions on Advanced Packaging, Feb 1999 Volume: 22, Issue: 1, page(s): 86-93

Overcoming element erosion limitations within Lagrangian finite element codes by Vignjevic, Rade; Hughes, Kevin; Walker, Andrew; Taylor, Emma A. from Proceedings of the Third European Conference on Space Debris, 19 - 21 March 2001, Darmstadt, Germany. Ed.: Huguette Sawaya-Lacoste. ESA SP-473, Vol. 2, Noordwijk, Netherlands: ESA Publications Division, ISBN 92-9092-733-X, 2001, p. 595 - 601.

Uncertainty in Finite Element Modeling and Failure Analysis: A Metrology-Based Approach by Jeffrey T. Fong, James J. Filliben, Roland de Wit, Richard J. Fields, Barry Bernstein, Pedro V. Matcal, Journal of Pressure Vessel Technology -- February 2006 -- Volume 128, Issue 1, pp. 140-147.

VEHICLE IMPACT WITH CURB-AND-GUARDRAIL SYSTEMS by Worcester Polytechnic Institute

Sustained Performance of Railway Tracks by Norwegian Geotechnical Institute (NGI)

Numerical simulation of train-track dynamics - Sustained Performance of Railway Tracks by Norwegian Geotechnical Institute (NGI)

ANALISE NUMERICA, TEORICA E EXPERIMENTAL DE LIGACOES VIGA MISTA-PILAR by William Oliveira Bessa and Roberto Martins Gonçalves.

ANÁLISE DO COMPORTAMENTO ESTRUTURAL DE LIGAÇÕES PARAFUSADAS VIGA-PILAR COM CHAPA DE TOPO ESTENDIDA by YURI IVAN MAGGI.

TMS 2004 - 133 Annual Metting & Exhibits by Robert Shang, Naiyi Li, William Altenhof, Henry Hu.

Research Accomplishments - Structures and Materials by CSAR at the University of Illinois

ROCSOLID User’s Guide by Ali Namazifard

IMPROVEMENTS TO THE WEAK-POST W-BEAM GUARDRAIL by Klas Erik Engstrand

A Comparative Study on Shell Element Deletion and Element Splitting by Hagbart S. Alsos

CDOT FOUNDATION DESIGN PRACTICE AND LRFD STRATEGIC PLAN by Nien-Yin Chang

Helmet Impact Simulation Benefits from Foam Material Data by Joe Metrisin and Steve Pilz, ANSYS Inc.

Dynamic Response of a Pulse-Heated, Thick- Walled Hollow Sphere: Validation of Code Numerics by R. E. Canaan

Structural Stability of a Drip Shield Under Quasi-Static Pressure Originator Tim Schmitt

Mechanical Assessment of the Drip Shield Subject to Vibratory Motion and Dynamic and Static Rock Loading Originator Branko Damjanac

A Modeling and Simulation Approach for Reentry Vehicle Aeroshell Structural Assessment by David M. Kendall, Kaz Niemiec, and Richard A. Harrison

Simulering av kallpressvetsning by Haris Hastor

NAFEMS Finite Element Benchmarks for MDG Code Verification by R.M. Ferencz, R. Greer

An Object Oriented, Finite Element Framework For Linear Wave Equations by Joseph M. Koning

Summary of Calculations Performed to Evaluate the Structural Integrity of the 6- Pack Container Pallet by C.A. Hrousis

TO DO OR NOT TO DO: FINITE ELEMENT ANALYSIS by Geyer, S.E.

As-built model generation for a cylindrical test object by D. H. Chambers, D. M. Goodman, R. R. Leach

Dynamic Side Impact Simulation of Aluminum Road Wheels Incorporating Material Property Variations by Robert Shang; Naiyi Li; William Altenhof; Henry Hu

Computer simulation of an F-4 Phantom crashing into a reinforced concrete wall by M. Itoh, M. Katayama & R. Rainsberger

Development of Machine-Augmented Composites for Infrastructure Applications by G. F. Hawkins, M. J. O'Brien, R. J. Zaldivar, H. F. Von Bremen, and J. N. Schurr

Numerical simulation of AM50A magnesium alloy under large deformation by William Altenhof, Anna Raczy, Melissa Laframboise, Jennifer Loscher, Ahmet Alpas

Evaluation of Impact Tests of Solid Steel Billet onto Concrete Pads, and Application to Generic ISFSI Storage Cask for Tipover and Side Drop by M. C. Witte T. F. Chen S. S. Murty D. T. Tang G. C. Mok L. E. Fischer R. W. Carlson

Summary and Evaluation of Steel Billet Testing by M. C. Witte J. Hovingh T. F. Chen S. S. Murty D. T. Tang G. C. Mok L. E. Fischer

A method for modyfying the forming tool geometry in order to compensate for springback effects by Anders Jernberg

Cost of Sanding by Nien-Yin Chang, Brian Brady

Modeling the Joust by Erik M. Berg & Roger L. Lampe

Samband mellan hårdhetstal och materialparametrar för polymermaterial by Martin Claesson & Johanna Forsgren

The Use of LS-DYNA in the Columbia Accident Investigation and Return to Flight Activities by Jonathan Gabrys and Josh Schatz, The Boeing Company; Kelly Carney and Matthew Melis, NASA Glenn Research Center; Edwin L. Fasanella, US Army Research Laboratory/VTD, Langley Research Center; Karen H. Lyle, NASA Langley Research Center;

Public Update on the Federal Building and Fire Safety Investigation of the World Trade Center Disaster by National Institute of Standards and Technology

Special Projects:Math & Computational Sciences Division by National Institute of Standards and Technology

Numerical Simulation of Jumbo Jet Impacting on Thick Concrete Walls - Effects of Reinforcement and Wall Thickness by Masahide Katayama, Masaharu Itoh, Robert Rainsberger

Numerical Investigation into the Aircraft Impact Problem on RC Structure by Masaharu Itoh, Masahide Katayama

COMPUTER SIMULATION OF IMPACT AND COLLAPSE OF NEW YORK WORLD TRADE CENTER NORTH TOWER ON SEPTEMBER 11 by X. Quan, and N. K. Birnbaum

PERFORMANCE OF W-BEAM SPLICES by Malcolm H. Ray, Chuck A. Plaxico, and Klas Engstrand

Validation of a Computer Code for Use in the Mechanical Design of Spallation Neutron Targets by Paul A. Montanez and Peter Sievers

THE FORMING OF COLLARED HOLES IN SHEET METAL by Caroline Lindgren

Refined 3D finite element modeling of partially restrained connections including slip by A.M. Citipitioglu, R.M. Haj-Ali, and D.W. White

FATIGUE CRACK MODELING IN BRIDGE DECK CONNECTION DETAILS by Robert K. Paasch and Anthony H. DePiero

DESIGN EVALUATION OF A LARGE CONCRETE CASK TO MEET IP-2 REQUIREMENTS by L. B. Shappert, R. R. Rawl, K. D. Handy, and P. B. Lester

Mathematical Physical Chemistry Modeling in Support of Reactive Transport by J. B. Jones-Oliveira, J. S. Oliveira, H. E. Trease, and J. X. Fowler

Structural Modifications of Existing BCT Guardrail Terminals by Dr. Jerry Wekezer

LS-DYNA Keyword User's Manual Copyright by Livermore Software Technology Corporation

Revised Conceptual Designs for the FMDP MOX Fresh Fuel Transport Package by S. B. Ludwig, R. D. Michelhaugh, L. B. Shappert, S. M. Chae, and J. S. Tang

THE USE OF FINITE ELEMENT ANALYSIS IN ROADSIDE HARDWARE DESIGN by Malcolm H. Ray

GasTurbnLab: a multidisciplinary problem solving environment for gas turbine engine design on a network of nonhomogeneous machines by E.N. Houstisa, A.C. Catlina, P.Tsompanopoulou, D.Gottfried, G.Balakrishnan, K. Sua, and J.R. Ricea

ISCR Subcontract Research Summaries: Spectral AMGe, ALE3D, and the FOSPACK Codes by John W. Ruge

A FINITE ELEMENT MODEL OF THE MODIFIED ECCENTRIC LOADER BREAKAWAY CABLE TERMINAL (MELT) by MALCOLM H. RAY AND GREGORY S. PATZNER from Transportation Research Record No. 1599

PELLPACK: a problem-solving environment for PDE-based applications on multicomputer platforms by E. N. Houstis, J. R. Rice, S. Weerawarana, A. C. Catlin, P. Papachiou, K.-Y. Wang, and M. Gaitatzes in ACM Transactions on Mathematical Software (TOMS) archive Volume 24, Issue 1 (March 1998), Pages: 30 - 7

PELLPACK Development Environment

An Agent-Based Netcentric Framework for Multidisciplinary Problem Solving Environments (MPSE) by S. Markus, E. N. Houstis, A.C. Catlin, J.R. Rice, P. Tsompanopoulou, E. Vavalis, D. Gottfried, and Ke Su.

GASTUTBNLAB: A Problem-Solving Environment for Gas Turbine Engine Design on a Network of Non-Homogeneous Machines by E. N. Houstis, A.C. Catlin, G. Balakrishnan, D. Gottfried, and Ke Su, P. Tsompanopoulou, and J.R. Rice.

Problem Solving Environmets by Romanowski Karol, Psiuk Marek

ANSYS Solutions by ANSYS Inc., ANSYS^® is a registered trademark of ANSYS Inc.

As-Built Modeling of Objects for Performance Assessment by Edwin J. Kokko, Harry E. Martz, Jr., Diane J. Chinn, Henry R. Childs, Jessie A. Jackson, David H. Chambers, Daniel J. Schneberk, and Grace A. Clark from Lawrence Livermore National Laboratory in Journal of Computing and Information Science in Engineering -- December 2006 -- Volume 6, Issue 4, pp. 405-417.

Crash Worthiness

Performance validation of two finite element models Of a side impact dummy by M. H. Ray, K. Hiranmayee, S. W. Kirkpatrick in International Journal of Crashworthiness, volume 4, issue 3, cover date 1999, page(s) 287-304.

Offset impact behaviour of bumper beam-longitudinal systems: numerical simulations by S Kokkulaa, O S Hopperstadb, O-G Lademob,c, T Berstadc, M Langsethb in International Journal of Crashworthiness, Volume 11, Issue 4, August 2006, p.p. 317-336.

Overcoming element erosion limitations within Lagrangian finite element codes by Vignjevic, Rade; Hughes, Kevin; Walker, Andrew; Taylor, Emma A.

Influence of the Forming Process on the Crash Response of a Roof Rail Component by Niclas Dagson

Development and Validation of High Fidelity Vehicle Crash Simulation Models by S. W. Kirkpatrick, J. W. Simons, and T. H. Antoun

PERFORMANCE VALIDATION OF TWO SIDE IMPACT DUMMIES by M H. Ray, K. Hiranmayee and S. Kirkpatrick

DEVELOPMENT OF A FINITE ELEMENT MODEL OF A 1998 AUDI A8 FOR CRASH ANALYSIS by Gustavo A. Aramayo and Alex Bobrek

CRASHWORTHINESS AND ROADSIDE SAFETY AT WORCESTER POLYTECHNIC INSTITUTE

D E S I G N O F A N O N - S N A G G I N G G U A R D R A I L P O S T Jessica Karlsson

Institute for Transportation Technologies Crashworthiness and Impact Analysis Laboratory (CIAL) by Dr. Jerry W. Wekezer

Development of an LS-DYNA Occupant Model for use in Crash Analyses of Roadside Safety Features by Steven W. Kirkpatrick, Robert MacNeill, and Robert T. Bocchieri

FORD CROWN VICTORIA CRASH SIMULATION by Dr. James D. Colton

FORD CROWN VICTORIA CRASH SIMULATION by Dr. Steven W. Kirkpatrick, Robert MacNeill, and Dr. Samuel Holmes

Shape Optimization and Parametric Modeling

Response Surface and Sensitivity-Based Optimization in LS-OPT: A Benchmark Study by Nielen Stander and K. J. Craig at 7th International LS-DYNA Users Conference.

Topology optimization in crashworthiness design by Jimmy Forsberg and Larsgunnar Nilsson, Structural and Multidisciplinary Optimization, Volume 33, Number 1 / January, 2007, PP 1-12.

Cancellous Bone Strains Indicate Efficacy of Stem Augmentation in Constrained Condylar Knees. by Rawlinson, Jeremy J PHD; Peters, Lance E MD; Campbell, Deirdre A MENG ; Windsor, Russell MD; Wright, Timothy M PHD; Bartel, Donald L PHD from Clinical Orthopaedics & Related Research. 440:107-116, November 2005.

Acoustic pressure load conversion method to vibration spectra by Rassaian; Mostafa, Lee; Jung-Chaun, Young; Gerould K., Landmann; Alan Edqar.

A Workshop for V V & A: A Metrology - based Uncertainty Analysis Approach by Jeffrey Fong, NIST.

Development of Machine-Augmented Composites for Infrastructure Applications by G. F. Hawkins, M. J. O'Brien, R. J. Zaldivar, H. F. Von Bremen, and J. N. Schurr

Refined 3D finite element modeling of partiallyrestrained connections including slip by A.M. Citipitioglu, R.M. Haj-Ali, and D.W. White

Development, Verification, and Validation of a Parametric Cervical Spine Injury Prediction Model by A.R. Bonivtch, W. L. Francis, D.E. Moravits, G.R. Paskoff, B.S. Shender, C.R. Bass, S.R. Lucas, F.A. Pintar, N. Yoganandan, M.H. Koebbe, B.H. Thacker, and D.P. Nicolella

New Developments in LS-OPT - Robustness Studies by Ken Craig, Willem Roux, and NielenStander

OPTIMIZATION OF SHELL BUCKLING INCORPORATING KARHUNEN KARHUNEN-LOEVE-BASED GEOMETRICAL IMPERFECTIONS by Ken Craig and NielenStander

A Comparison of Metamodeling Techniques for Crashworthiness Optimization N. Stander and W. Roux, Livermore Software Technology Corporation, Livermore, CA; M. Giger and M. Redhe, University of Linkoping, Linkoping, Sweden; N. Fedorova, Snezhinsk Institute of Physics and Technology, Snezhinsk, Russia; J. Haarhoff, University of Pretoria, Pretoria, South Africa, in AIAA-2004-4489, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, Aug. 30-1, 2004

Worst-case design in head impact crashworthiness optimization by K. J. Craig, Nielen Stander, Suri Balasubramanyam in International Journal for Numerical Methods in Engineering, Volume 57, Issue 6 , Pages 795 - 817

Stochastic analysis of highly non-linear structures by Willem Roux, Nielen Stander, Frank Gunther, Heiner Mullerschon

Optimization of draw-in for an automotive sheet metal part An evaluation using surrogate models and response surfaces by T. Janssona, A. Anderssonb, c, and L. Nilsson in Journal of Materials Processing Technology, Volume 159, Issue 3 , 10 February 2005, Pages 426-434

Crashworthiness Optimization in LS-OPT: Case Studies in Metamodeling and Random Search Techniques by Nielen Stander, William Roux, Mathias Giger, Marcus Redhe, Nely Fedorova, Johan Haarhoff

SPRINGBACK COMPENSATION IN SHEET METAL FORMING USING A SUCCESSIVE RESPONSE SURFACE METHOD by Nielen Stander, Mike Burger, Xinhai Zhu and Bradley Maker in 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization 4-6 September 2002, Atlanta, Georgia.

Shape Optimization for Head and Knee Impact Featuring Adaptive Mesh Topology and a Discrete Variable by Nielen Stander, Mike Burger, Suri Balasubramanyam

An Optimization Procedure for Springback Compensation using LS-OPT by Nielen Stander, Mike Burger, Xinhai Zhu and Bradley Maker

Optimization of an energy absorbing frontal underrun protection device for a truck by Celine Petit

Numerische Simulation formvariabler Strukturkonzepte axialer Eintrittsleitrader von Turboverdichtern by Tobias Muller and Martin Lawerenz

Parametric Finite Element Modeling Across Many Simulation Codes by Robert Rainsberger

LS-OPT Features by WILLEM ROUX, NIELEN STANDER

Shape Optimization for Crashworthiness using LS Crashworthiness using LS-OPT and OPT and Distributed Computing by BOB KUHN, HRABRI RAJIC, ALEX AKKERMAN, RAVI THYAGARAJAN, NIELEN STANDER, and MIKE BURGER

Shape Adaptive Airfoils for Turbomachinery applications: Simulation and Optimization by Tobias Muller and Martin Lawerenz

Analyzing 'Noisy' Structural Problems with LS-OPT: Probabilistic and Deterministic Fundamentals by Willem Roux and Nielen Stander

ON THE ROBUSTNESS OF A SIMPLE DOMAIN REDUCTION SCHEME FOR SIMULATION-BASED OPTIMIZATION by Nielen Stander and K.J. Craig

LS-OPT User’s Manual by NIELEN STANDER, Ph.D. KEN CRAIG, Ph.D. WILLEM ROUX, Ph.D.

Hydrodynamics

The Interpretation of Separation Mechanism of Ridge-Cut Explosive Bolt Using Software Simulation Program by Y. J. Lee (Agency for Defecse and Development, and Hanwha Corporation)D. J. Kim (Agency for Defecse and Development, and Hanwha Corporation) in Proceedings of Asian Joint Conference on Propulsion and Power 2004, pp. 532-543.

Rational Analysis of Tunnels Subjected to Different Explosive Loads by Dr. Adel Mahmoud Belal in International Symposium on Utilization of underground space in urban areas, 6-7 November 2006, Sharm El-Sherikh, Egypt.

3D Numerical Simulation Research on the Formation of Explosively Formed Penetrator with Fins from JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY 2002 Vol.22 No.2 P.166-168

NUMERICAL SIMULATION RESEARCH ON THE INFLUENCE OF SENSING ELEMENTS ON EFP FORMING by Men, Jianbing; Jiang, Jianwei; Luo, Jian Dandao Xuebao in JOURNAL OF BALLISTICS, 2005 Vol.17 No.1 P.67-71

Comparison and Validation of Smooth Particle Hydrodynamics (SPH) and Coupled Euler Lagrange (CEL) Techniques for Modeling Hydrodynamic Ram C. Sparks, R. Hinrichsen, D. Friedmann AIAA-2005-2331 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference , Austin, Texas, Apr. 18-21, 2005 by

Grain-scale Dynamics in Explosives by J. E. Reaugh

HIGH SPEED IMPACT ON CERAMIC PLATES

RESEARCH AND SIMULATION OF BALLISTICS PROCESSES OF SMALL ARMS AMMUNITION BULLETS by Andrius Vilkauskas

BALLISTIC IMPACT ON CERAMIC/ARAMID ARMOUR SYSTEMS

NUMERICAL SIMULATION OF IMPACT ON CERAMIC ARMOUR SYSTEM

BALLISTIC SIMULATION OF IMPACT ON COMPOSITE LAMINATES by M.A.G. Silva, C. Cismasiu, and C.G. Chiorean

Low Velocity Impact on Laminates Reinforced with Polyethylene and Aramidic Fibres by M.A.G. Silva, C. Cismasiu, and C.G. Chiorean

NUMERICAL SIMULATION OF STRUCTURAL DEFORMATION UNDER SHOCK AND IMPACT LOADS USING A COUPLED MULTI-SOLVER APPROACH by X. Quan, N. K. Birnbaum, M.S. Cowler, B. I. Gerber, R.A. Clegg, C.J.Hayhurst

Finite Element Modelling of Failure of a Multi-Material Target due to High Velocity Space Debris Impacts by Rade Vignjevic, Kevin Hughes and Emma A. Taylor

The Numerical Simulation of High Explosives using AUTODYN-2D & 3D by G E Fairlie

COMPUTER MODELLING OF FULL SIZE FRAGMENTING AIMABLE WARHEADS USING AUTODYN-3D by G E Fairlie, C O Marriott, N J Robertson, I H Livingstone, N K Birnbaum

Thermal

High Precision Droplet Based Net-Form Manufacturing by A. B. Shapiro

Computational Mechanics Moves Ahead by Peter Raboin

TOOLS AND METHODS FOR SIMULATION IN THERMAL DESIGN OF ELECTRONICS FOR USE IN HARSH ENVIRONMENTS by Jonas Johansson

Electromagnetics

Propagation of weakly guided waves in a Kerr nonlinear medium using a perturbation approach by Jennifer Dacles-Mariani, a, and Garry Rodrigue in Communications in Nonlinear Science and Numerical Simulation Volume 12, Issue 5, August 2007, Pages 673-686.

Introduction of an Electromagnetism Module in Ls-DYNA for Coupled Mechanical-Thermal-Electromagnetic Simulations. by P. Pierre L'Eplattenier, Garnt Cook, Cleve Ashcraft, Mike Burger, Art Shapiro, Genn Daehn

Discrete Differential Forms: A Novel Methodology for Robust Computational Electromagnetics by P. Castillo, J. Koning, R. Rieben, M. Stowell, and D. White

Copper Tube Compression in Z-Current Geometry, Numerical Simulations and Comparison with Cyclope Experiments A. Lefrançois, P.L. 'Eplattenier, M. Burger, UCRL-TR-219180, Lawrence Livermore National Laboratory

Isentropic Compression up to 200 KBars for LX 04, Numerical Simulations and Comparison with Experiments A. Lefrançois, P.L. 'Eplattenier, M. Burger, UCRL-TR-219185, Lawrence Livermore National Laboratory

Isentropic Compression in a Strip Line, Numerical Simulations and Comparison with GEPI Shot 268 A. Lefrançois, P.L. 'Eplattenier, M. Burger, UCRL-TR-219179, Lawrence Livermore National Laboratory

Design characterization of microwave antenna BGA interconnectstructure using test-validated physics-of-failure methods Pietila, D.A. Rassaian, M. Brice-Heames, K. in Reliability Physics Symposium Proceedings, 1999. 37th Annual. 1999 IEEE International

Low Frequency Signal Propagation in a Mountain Environment contact Danial White at Lawrence Livermore National Laboratory

Discrete Time Vector Finite Element Methods for Solving Maxwell's Equations on 3D Unstructured Grids by Daniel Arthur White, UCRL-LR-128238

Fluids and Structures

PREDICTION OF SURFACE SHIP RESPONSE TO SEVERE UNDERWATER EXPLOSIONS USING A VIRTUAL UNDERWATER SHOCK ENVIRONMENT by Nathan A. Schneider

Ship Shock Trial Simulation of USS Winston S. Churchill (DDG 81): Modeling and Simulation Strategy and Surrounding Fluid Volume Effects by Young S. Shin and Nathan A. Schneider

CAVITATION EFFECTS ON A SHIP-LIKE BOX STRUCTURE SUBJECTED TO AN UNDERWATER EXPLOSION by Steven L. Wood

Shock Trial Simulation for Naval Ships by Lt. Jarema M. Didoszak, USN, Dr. Young S. Shin, and Capt. David H. Lewis, USN

Ship shock modelling and simulation for far-field underwater explosion by Y. S. Shin

LPD-17 Pretrial Ship Shock Response Predictions: Coupled Ship-Fluid Model Generation by Jarema Didoszak, LCDR Laura Bollock, Jose Lepe, Dr. Young Shin, Naval Postgraduate School

Structures and Materials by CSAR project, University of Illinois

Coupled fluid-structure 3-D solid rocket motor simulations by R. Fiedler, X. Jiao, A. Namazifard, A. Haselbacher, F. Najjar, and I. D. Parsons (Illinois, Univ., Urbana) in AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 37th, Salt Lake City, UT, July 8-11, 2001

Coupled simulations of solid rocket motors by I. D. Parsons, P. Alavilli, A. Namazifard, A. Acharya, X. Jiao, and R. Fiedler, AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 36th, Huntsville, AL, July 16-19, 2000.

Fluid-Structure Interaction through a Non-Material Interface: Simulations of Solid Rocket Motors by I. D. Parsons, P. Alavilli, A. Namazifard, X. Jiao, A. Acharya

COUPLED FLUID-STRUCTURE 3-D SOLID ROCKET MOTOR SIMULATIONS by R. Fiedler, X. Jiao, A. Namazifard, A. Haselbacher, F. Najjar, and I. D. Parsons

SIMULATING SOLID PROPELLANT ROCKETS AT CSAR by M. Heath, R. Fiedler,and W. Dick

INTEGRATED SIMULATION OF SOLID PROPELLANT ROCKETS by William A. Dickà, Robert A. Fiedler , and Michael T. Heath

No Title by Hans U. Mair

COUPLED SIMULATIONS OF SOLID ROCKET MOTORS by I. D. Parsons, P. Alavilli, A. Namazifard, A. Acharya, X. Jiao and R. Fiedler

Structures and Materials FY98 by Center for Simulation of Advanced Rockets

CFD

Using Computational Fluid Dynamics for Model Development and Simulator Validation by Thomas Z. Moore, Christopher J. Freitas, Ryan M. Keedy, J. Brian Fisher.

An Experimental and Computational Investigation of Flow in a Radial Inlet of an Industrial Pipeline Centrifugal Compressor by G. Laskowski

Detached Eddy Simulations of lncom pressi ble Turbulent Flows Using the Finite Element Method by M.B. Flathers, Solar Turbines Incorporated, San Diego, CA, USA; G.E. Bache, Advanced Scientific Computing Corporation, El Dorado Hills, CA, USA; R. Rainsberger, XYZ Scientific Applications Inc., Livermore, CA, USA;

Ship Concept Exploration and Development Ship Concept Exploration and Development Using Multi Using Multi-Objective and Multi Objective and Multi-Disciplinary Optimization by AOE Advisory Board

Unmanned Combat Air Vehicle Carrier (CUVX) Unmanned Combat Air Vehicle Carrier (CUVX), Agile Surface Combatant (ASC) Agile Surface Combatant (ASC), Littoral Warfare Submarine (LWSS) by Virginia Tech

A distributed memory parallel implementation of the multigrid method for solving three-dimensional implicit solid mechanics problems by Dennis Parsons and Ali Namazifard in International Journal for Numerical Methods in Engineering, Volume 61, Issue 8 , Pages 1173 - 1208

Scalable Multigrid Methods Using Fortran90 and MPI by Dennis Parsons and Ali Namazifard

Subsurface transport modeling using adaptive finite elements by D. W. Pepper, Yi-tung Chen, and Lan Li

SHIP SHOCK TRIAL SIMULATION OF USS WINSTON S. CHURCHILL (DDG81): SURROUNDING FLUID EFFECT by David T. Hart

Interface Logic for TAM-ALE3D by Dana Gottfried and Sanford Fleeter

GILA User's Manual by Mark A. Christon

FILTRATION THEORY USING COMPUTER SIMULATIONS by Werner Bergman and Ivan Corey

GasTurbnLab MPSE Framework by Purdue University

Monte Carlo Methods

PERFORMANCE AND ACCURACY ENHANCEMENTS OF RADIATIVE HEAT TRANSFER MODELING VIA MONTE CARLO by Charles Nelson Zeeb

PERFORMANCE ENHANCEMENTS OF MONTE CARLO PARTICLE TRACING ALGORITHMS FOR LARGE, ARBITRARY GEOMETRIES by Charles N. Zeeb and Patrick J. Burns

BioMechanical FEA

Transient, Three-dimensional, Multiscale Simulations of the Human Aortic Valve by Eli J. Weinberg Æ Mohammad Reza Kaazempur Mofrad in Cardiovasc Eng, DOI 10.1007/s10558-007-9038-4, Springer Science+Business Media, LLC 2007

COMPUTATIONAL MODELING OF HIP JOINT MECHANICS by Andrew Edward Anderson, The University of Utah.

Modeling and simulating the deformation of human skeletal muscle based on anatomy and physiology by Robson R. Lemos, Jon Rokne, Gladimir V. G. Baranoski, Yasuo Kawakami, Toshiyuki Kurihara in Computer Animation and Virtual Worlds, Volume 16, Issue 3-4 , Pages 319 - 330.

Biomechanical assessment of stability in the metastatic spine following percutaneous vertebroplasty: effects of cement distribution patterns and volume. by C. Tschirhart, S. Roth, C. Whyne in Journal of Biomechanics, Volume 38, Issue 8, Pages 1582-1590.

Implementing Capsule Representation in a Total Hip Dislocation Finite Element Model by Kristofer J Stewart, MS, Douglas R Pedersen, PhD, John J Callaghan, MD, and Thomas D Brown, PhD in Iowa Orthop J. 2004; 24: 1–8. .

VALIDATION OF BONE STRAINS AND CARTILAGE CONTACT STRESS IN A 3-D FINITE ELEMENT MODEL OF THE HUMAN HIP by Andrew E. Anderson, Christopher L. Peters, Benjamin J. Ellis, S. Janna Balling, Jeffrey A. Weiss in 2005 Summer Bioengineering Conference, June 22-26, Vail Cascade Resort & Spa, Vail Colorado.

Relationships between tissue dilatation and differentiation in distraction osteogenesis by Elise F. Morgan, Michael T. Longaker, and Dennis R. Carter in Matrix Biol. 2006 March; 25(2): 94-103.

Tissue strain amplification at the osteocyte lacuna: A microstructural finite element analysis. by A. Rath Bonivtch, L. Bonewald, D. Nicolella in Journal of Biomechanics, Volume 40, Issue 10, Pages 2199-2206.

Three Dimensional Dynamic Hypoelastic Remodeling in the Proximal Femur by Charles Hugh Negus, Ph.D. Thesis, UNIVERSITY OF CALIFORNIA, SAN DIEGO SAN DIEGO STATE UNIVERSITY

Continuum remodeling revisited by Charles H. Negus, and Thomas J. Impelluso in Biomechanics and Modeling in Mechanobiology in Volume 6, Number 4 / July, 2007

Strain Measurement in the Left Ventricle During Systole with Deformable Image Registration by Nikhil S. Phatak, Steve A. Maas, Alexander I. Veress, Nathan A. Pack, Edward V. R. Di Bella and Jeffrey A. Weiss in Lecture Notes in Computer Science, Springer Berlin / Heidelberg, Functional Imaging and Modeling of the Heart.

EFFECTS OF FUSION MASS DENSITY AND FUSION LOCATION ON THE STRENGTH OF A LUMBAR INTERBODY FUSION by Sachin P. Budhabhatti, Ahmet Erdemir, Marc Petre, Cassi Elizabeth Shelly

Finite Element Modeling of the First Ray of the Foot: A Tool for the Design of Interventions by Sachin P. Budhabhatti, Ahmet Erdemir, Marc Petre, James Sferra, Brian Donley and Peter R. Cavanagh in Journal of Biomechanical Engineering -- October 2007 -- Volume 129, Issue 5, pp. 750-756.

BIOMECHANICS OF THE PRODISC ARTIFICIAL DISC USING FINITE ELEMENT ANALYSIS by Yabo Guan, Frank A. Pintar, Narayan Yoganandan, Jiangyue Zhang, Dennis J. Maiman at Department of Neurosurgery, Medical College of Wisconsin.

Physical validation of a patient-specific contact finite element model of the ankle?. by D. Anderson, J. Goldsworthy, W. Li, M. James Rudert, Y. Tochigi, T. Brown in Journal of Biomechanics, Volume 40, Issue 8, Pages 1662-1669.

Updating a 3-D vertebral body finite element model using 2-D images by A. Templeton in Medical Engineering & Physics, Volume 26, Issue 4, Pages 329-333.

STRESSES IN THE L2 VERTEBRA UNDER DIFFERENT LOADING CONDITIONS by Ibrahim Erdem, Eeric Truumees, and Marjolein C. H. van der Meulen

DEFORMATION AT BRANCH POINTS IN HUMAN CEREBRAL ARTERIES by Joshua H. Smith, Louis Y. Cheng, Geoffrey T. Manley, and Kenneth L. Monson

Noninvasive Determination of Ligament Strain with Deformable Image Registration by NIKHIL S. PHATAK, QUNLI SUN, SEONG-EUN KIM, DENNIS L. PARKER, R. KENT SANDERS, ALEXANDER I. VERESS, BENJAMIN J. ELLIS, and JEFFREY A. WEISS in Annals of Biomedical Engineering, Vol. 35, No. 7, July 2007 (2007) pp. 1175–1187.

Surgical Variables Affect the Mechanics of a Hip Resurfacing System by Long, Jason P BS *; Bartel, Donald L PhD in Clinical Orthopaedics & Related Research. 453:115-122, December 2006.

The Contribution of the Ossific Nucleus to the Structural Stiffness of the Capital Femoral Epiphysis: A Porcine Model for DDH by Segal, Lee S. M.D.; Schneider, David J. M.D.; Berlin, Joshua M. B.S.E.; Bruno, Anthony M.D. *; Davis, Barclay R. M.S.; Jacobs, Christopher R. Ph.D. in Journal ofPediatric Orthopaedics, July/August 1994, 19:4.

Biomechanics of vertebral level, geometry, and transcortical tumors in the metastatic spine by Tschirhart C, Finkelstein J, Whyne C. in Journal of Biomechanics, Volume 40, Issue 1, Pages 46-54

Relationships between tissue dilatation and differentiation in distraction osteogenesis By Elise F. Morgana, Michael T. Longakerb, and Dennis R. Carter in Matrix Biology , Volume 25, Issue 2, March 2006, Pages 94-103

Normal and Pathological NCAT Image and Phantom Data Based on Physiologically Realistic Left Ventricle Finite Element Models By Alexander I. Veress, W. Paul Segars, Jeffrey A. Weiss, Benjamin M. W. Tsui, and Grant T. Gullberg, in IEEE Transactions on Medical Imaging, May 5, 2006.

Computer Simulation and Experimental Assessment of Cardiac Electrophysiology By Lukas Kappenberger, Nathalie Virag, MS. Olivier Blanc.

The Potential for Bone Loss in Acetabular Structures Following THA. by Manley, Michael T PhD; Ong, Kevin L PhD; Kurtz, Steven M PhD in Clinical Orthopaedics and Related Research, Dec. 2006, 453.

Wear simulation of the ProDisc-L disc replacement using adaptive finite element analysis by Jeremy J. Rawlinson, Karan P. Punga, Kirk L. Gunsallus, Donald L. Bartel and Timothy M. Wright in the Journal of Neurosurgery, August 2007, Volume 7, number 2.

DEVELOPMENT OF AN LS-DYNA FINITE ELEMENT MODEL OF THE CRANIO-CEREBRAL COMPLEX FOR UNDERSTANDING BIOMECHANICS OF TRAUMATIC BRAIN INJURY by Binu Oommen, David Nicholson, Ted Conway, Alexandra Ahlqvist, Gerald Bertetta.

Vliv mechanickeho zatizeni na vznik a vyvoj osteoartrozy kycelniho kloubu by Ing. Zdenek Horak, Doc. Ing. Miroslav Sochor, CSc. , MUDr. Ing. Lubomir Pousek, MBA.

A Versatile System for Computer Integrated Mini-invasive Robotic Surgery by Louai Adhami, Eve Coste-ManiEre in Medical Image Computing and Computer-Assisted Intervention - MICCAI 2002: 5th International Conference, Tokyo, Japan, September 25-28, 2002, Proceedings, Part I.

A three-dimensional, anatomically detailed foot model: A foundation for a finite element simulation and means of quantifying foot-bone position by Daniel L.A. Camacho, MD, PhD; William R. Ledoux, PhD; Eric S. Rohr, MS; Bruce J. Sangeorzan, MD; Randal P. Ching, PhD

Influences on Orthopaedic Implant Design by Daniel S. Balint

An articular cartilage contact model based on real surface geometry. by S. Han, S. Federico, M. Epstein, W. Herzog in Journal of Biomechanics, Volume 38, Issue 1, January 2005, Pages 179-184

Semiautomated finite element mesh generation methods for a long bone. by T. Pfeiler, D. Lalush, E. Loboa in Computer Methods and Programs in Biomedicine, Volume 85, Issue 3, Pages 196-202

Probabilistic Cervical Spine Probabilistic Cervical Spine Risk Assessment of Aviators by Ben H. Thacker and Daniel P. Nicolella

Metastatic Burst Fracture Risk Assessment Based on Complex Loading of the Thoracic Spine by Craig E. Tschirhart, Joel A. Finkelstein and Cari M. Whyne from Annals of Biomedical Engineering,Volume 34, Number 3 / March, 2006, p.p. 494-505.

A 3D POROELASTIC FINITE ELEMENT STUDY OF A STEP-OFF ARTICULAR INCONGRUITY by Curtis M. Goreham-Voss, Thomas D. Brown.

Towards an Improved Rupture Potential Index for Abdominal Aortic Aneurysms: Anisotropic Constitutive Modeling and Noninvasive Wall Strength Estimation by Jonathan P. Vande Geest, PhD

Vliv mechanickeho zatizeni na vznik a vyvoj osteoartrozy kycelniho kloubu by Ing. Zdenek Horak, Doc. Ing. Miroslav Sochor, CSc., MUDr. Ing. Lubomir Pousek, MBA.

Modelling of temporomandibular joint and FEM analysis by MARTINA FRICOVA, ZDENEK HORAK, SVATAVA KONVICKOVA

Parametric Cervical Spine Model for Injury Assessment Using Probabilistic Finite Element Methods by Ben H. Thacker, Daniel P. Nicolella, G. Mark Jones

Berkeley Orthopaedic Biomechanics Laboratory

Design and Application of a Test System for Viscoelastic Characterization of Collagen Gels by Laxminarayanan Krishnan, BSI, Jeffrey A. Weiss, PhD, Michael D. Wessman, BS, James B. Hoying, PhD, in Tissue Engineering, Jan 2004, Vol. 10, No. 1-2 : 241 -252.

Research Report Trauma and Reconstructive Surgery by Prof. Dr. N. P. Haas

EFFECTS OF IMPLANT DESIGN PARAMETERS ON FLUID INGRESS DURING THA IMPINGEMENT/SUBLUXATION by Hannah J. Lundberg, Douglas R. Pedersen, John J. Callaghan, Thomas D. Brown

PROBABILISTIC SHAPE-BASED FINITE ELEMENT ANALYSES OF BABOON FEMURS by Todd L. Bredbenner, Keith A. Bartels, Lorena M. Havill, Jason B. Pleming, and Daniel P. Nicolella.

Influence of mechanical behavior on the wear of 4 clinically relevant polymeric biomaterials in a hip simulator by A. Edidin, S. Kurtz in The Journal of Arthroplasty, Volume 15, Issue 3, Pages 321-331.

Osteolysis: A Disease of Access to Fixation Interfaces. by Manley, Michael T. PhD; D'Antonio, James A. MD; Capello, William N. MD; Edidin, Avram A. PhD in Clinical Orthopaedics & Related Research. 405:129-137, December 2002.

Validation of a clinical finite element model of the human lumbosacral spine by Yabo Guan, Narayan Yoganandan, Jiangyue Zhang, Frank A. Pintar, Joesph F. Cusick, Christopher E. Wolfla and Dennis J. Maiman in Medical and Biological Engineering and Computing, Volume 44, Number 8 / August, 2006.

Nano-microscale models of periosteocytic flow show differences in stresses imparted to cell body and processes. by Anderson EJ, Kaliyamoorthy S, Iwan J, Alexander D, Knothe Tate ML. in Ann Biomed Eng. 2005 Jan;33(1):52-62.

Knochen und Knochen-Zement-Belastungen in der thorakolumbalen Wirbelsäule nach Kyphoplastik by L. M. Villarraga Ph.D., P. A. Cripton, A. J. Bellezza, U. Berlemann4, S. M. Kurtz, und A. A. Edidin from Der Orthopäde, Volume 33, Number 1 / January, 2004.

Medial collateral ligament insertion site and contact forces in the ACL-deficient knee by Benjamin J. Ellis, Trevor J. Lujan, Michelle S. Dalton, Jeffrey A. Weiss in the Journal of Orthopaedic Research, Volume 24, Issue 4 , Pages 800 - 810.

Biomechanics of Prophylactic Vertebral Reinforcement. by Sun, Kay BSc; Liebschner, Michael A. K. PhD from Spine. 29(13):1428-1435, July 1, 2004.

ANNUAL REPORT of ORTHOPAEDIC BIOMECHANICS LABORATORY, DEPARTMENT OF ORTHOPAEDICS & REHABILITATION, THE UNIVERSITY OF IOWA.

Retrieval, experimental, and computational assessment of the performance of total knee replacements by Jeremy J. Rawlinson *, Bridgette D. Furman, Stephen Li, Timothy M. Wright, Donald L. Bartel, Journal of Orthopaedic Research, Volume 24, Issue 7 , Pages 1384 - 1394.

A Framework for Structured Modeling of Skeletal Muscle by R.R. Lemos; M. Epstein; W. Herzog; B. Wyvill from Computer Methods in Biomechanics and Biomedical Engineering, Volume 7, Number 6, December, 2004, pp. 305-317(13).

A Finite Element Model of the Human Knee Joint for the Study of Tibio-Femoral Contact by Tammy L. Haut Donahue, M. L. Hull, Mark M. Rashid, and Christopher R. Jacobs from Journal of Biomechanical Engineering -- June 2002 -- Volume 124, Issue 3, pp. 273-280.

An evaluation of deformation based Chest Injury Criteria using a hybrid III finite element model by Ahmed Noureddine, Kennerly H Digges, Nabih E Bedewi from International Journal of Crashworthiness, Volume: 1, Issue: 2.

THA loading arising from increased femoral anteversion and offset may lead to critical cement stresses by Ralf U. Kleemann, Markus O. Heller, Ulrich Stoeckle, William R. Taylor, Georg N. Duda, Journal of Orthopaedic Research, Volume 21, Issue 5 , Pages 767 - 774

Mechanobiology of mandibular distraction osteogenesis: Finite element analyses with a rat model by Elizabeth G. Loboa, Tony D. Fang, David W. Parker, Stephen M. Warren, Kenton D. Fong, Michael T. Longaker, Dennis R. Carter from the Journal of Orthopaedic Research, Volume 23, Issue 3, Pages 663-670.

Biomechanics of the Birmingham hip resurfacing arthroplasty by K. L. Ong, PhD, Managing Engineer, S. M. Kurtz, PhD, Principal Engineer, M. T. Manley, PhD, Bioengineer Consultant, N. Rushton, MD, FRCS, Professor of Orthopaedics, N. A. Mohammed, MBBS, Research Fellow and R. E. Field, PhD, FRCS, FRCS(Orth), Consultant Orthopaedic Surgeon , Journal of Bone and Joint Surgery - British Volume, Vol 88-B, Issue 8, 1110-1115.

Modeling of the Naked Facet Sign in the Lumbar Spine. by Harris, Mitchel B.; Chang, David S.; Shilt, Jeffery S.; Villarraga, Marta L.; Thomas, Kevin A.; Stelly, Marcus V., Journal of Spinal Disorders & Techniques. 15(6):495-501, December 2002

Influence of FE model variability in predicting brain motion and intracranial pressure changes in head impact simulations by T J Horgan and M D Gilchrist, International Jpurnal of Crashworthiness

Total Knee Replacement Polyethylene Stresses During Loading in a Knee Simulator by Virginia L. Giddings, Steven M. Kurtz, and Avram A. Edidin, Journal of Tribology

STRESSES IN A HIGHLY CROSSLINKED ACETABULAR COMPONENT FOR TOTAL HIP REPLACEMENT by Kurtz, S (A-Sulzer); Giddings, V (A-Sulzer); Muratoglu, O (C-Sulzer); O'Connor, D (C-Sulzer); Harris, W (C-Sulzer); Krevolin, J (E-Sulzer)

PROBABILISTIC RESPONSE OF A VALIDATED AND VERIFIED PARAMETRIC CERVICAL SPINE FINITE ELEMENT MODEL by W. L. Francis, A.R. Bonivtch, D.E. Moravits, G.R. Paskoff, B.S. Shender, C.R. Bass, S.R. Lucas, F.A. Pintar, N. Yoganandan, M.H. Koebbe, B.H. Thacker, and D.P. Nicolella

THE EFFECT OF DESIGN VARIATIONS ON STRESSES IN TOTAL ANKLE ARTHROPLASTY by Karol Galik

INFLUENCE OF FOOT ORIENTATION AND BONE STRUCTURE ON PLANTAR PRESSURE DISTRIBUTION by Sachin P. Budhabhatti, Ahmet Erdemir, and Peter R. Cavanagh

A RECONSTRUCTION PROCEDURE FOR NON-CONTINOUSLY FRACTURED TIBIA: NUMERICAL AND EXPERIMENTAL EVALUATION by Marco Anghileri and Malcolm H. Ray

DEVELOPMENT AND VALIDATION OF A 50TH PERCENTILE MALE HUMAN FEMUR by Luca Valle and Malcolm H. Ray

Center for Human Impact Protection Systems by Malcolm H. Ray

A Finite Element Model Of The Human Head For Use In The Study Of Pedestrian Accidents by Timothy James Horgan

VIRTUAL PROTOTYPING AND TESTING FOR MEDICAL DEVICE DEVELOPMENT by WHIRLEY, Robert G. and CHOBOTOV, Michael V.

VIRTUAL PROTOTYPING AND TESTING FOR MEDICAL DEVICE DEVELOPMENT RELATED APPLICATIONS

TOOLS FOR DEFORMABLE IMAGE REGISTRATION by Anton Edis Bowden

Performance Evaluation of Three Commercial Cell Flow Chambers: How Well is Stress Controlled at the Cellular Level? by Eric Anderson, Roland Steck, Sathya Kaliyamoorthy, and Melissa L. Knothe Tate

The Effects of +Gz Loading Condition on the Human Heart by Kamran Behdinan and Primuz Cresnik

brief synopsis of my research by Brad Probst

Three-dimensional finite element modeling of ligaments: Technical aspects by Jeffrey A. Weiss, John C. Gardiner, Benjamin J. Ellis, Trevor J. Lujan, Nikhil S. Phatak

A computational method for comparing the behavior and possible failure of prosthetic implants by Nielsen, C. Hollerbach, K. Perfect, S. Underhill, K. in Engineering in Medicine and Biology Society, 1995. IEEE 17th Annual Conference, Publication Date: 20-23 Sep 1995, Volume: 2, On page(s): 1251-1252 vol.2, Meeting Date: 09/20/1995 - 09/23/1995

Automated Volumetric Grid Generation for Finite Element Modeling of Human Hand Joints by K. Hollerbach, K. Underhill, R. Rainsberger

Calcaneal loading during walking and running by VIRGINIA L. GIDDINGS, GARY S. BEAUPR´ E, ROBERT T. WHALEN, and DENNIS R. CARTER

Three-Dimensional Representation of Complex Muscle Architectures and Geometries by Silvia S. Blemker, Scott L. Delp

Rectus femoris and vastus intermedius fiber excursions predicted by three-dimensional muscle models by Silvia S. Blemker, Scott L. Delp

NONINVASIVE MEASUREMENT OF MENISCUS STRAIN USING MRI AND HYPERELASTIC WARPING by Sun, Q; Phatak, N; Burks, RT; Greis, PE; McCann, JL; Kim, SE; Jeong, EK; Parker, DL; Weiss, JA

IMPLEMENTING CAPSULE REPRESENTATION IN A TOTAL HIP DISLOCATION FINITE ELEMENT MODEL by Kristofer J. Stewart, M.S.; Douglas R. Pedersen, Ph.D.; John J. Callaghan, M.D.; and Thomas D. Brown, Ph.D.

DEVELOPMENT OF A TOTAL HIP DISLOCATION FINITE ELEMENT MODEL WITH CAPSULE REPRESENTATION by Stewart, K J; Pedersen, D R; Brown, T D

INFLUENCE OF MECHANICAL LOADING CHANGE ON THE STRESS OF THE HIP JOINT by Horák Zdenek, Vrána Jan, Koukalová Jana

Knee Mesh by D. D. Cody

A Closer Look at the Capillary Edothelial Glycocalyx by Karin Leiderman

Stress and strain in the anterior band of the inferior glenohumeral ligament during a simulated clinical examination by Richard E. Debski, PhD, Jeffrey A. Weiss, PhD, William J. Newman, Susan M. Moore, and Patrick J. McMahon, MDi in Journal of Shoulder and Elbow Surgery, Volume 14, Issue 1, Pages S24-S31.

Modeling a kenatavr@msn.comHydrogel Implant in the Articular Cartilage of the Knee by David Veltre

Recent development on computer aided tissue engineering by Wei Sun, Pallavi Lal

Design and Application of a Test System for Viscoelastic Characterization of Collagen Gels by LAXMINARAYANAN KRISHNAN, JEFFREY A. WEISS, MICHAEL D. WESSMAN, and JAMES B. HOYING

Finite Element Modeling Used to Study Stress Distribution on the Foot by Morales, Nelson: Stress Distribution Study on the Foot Using Finite Element Modelling. Master of Science Thesis, Case Western Reserve University, 2003

Simulation and Visualization of Biological Structures (Biovis3D) by Robson Lemos

A Computer Model of Normal Conduction in the Human Atria by David M. Harrild, Craig S. Henriquez.

The development and validation of a computational foot and ankle model by Ledoux, W.; Camacho, D.; Ching, R.; Sangeorzan, B., Engineering in Medicine and Biology Society, 2000. Proceedings of the 22nd Annual International Conference of the IEEE Volume 4, Issue , 2000 Page(s):2899 - 2902 vol.4

Finite Element Foot Modeling by William R. Ledoux, Ph.D., Daniel L. S. Camacho, M.D., Ph.D., Randal P. Ching, Ph.D., Eric S. Rohr, M.S., Chimba Mkandawire, Ph.D. candidate, and Bruce Sangeorzan, M.D.

Biphasic Finite Element Modeling of Tear Effects On the Mechanics of the Meniscus by Michelle A. LeRoux, Maureen L. Upton, Tod A. Laursen, Lori A. Setton.

Effects of Bone Cement Volume and Distribution on Vertebral Stiffness After Vertebroplasty by Michael A.K. Liebschner, PhD, William S. Rosenberg, MD, and Tony M. Keaveny, PhD

Finite Element Modeling of the Human Thoracolumbar Spine by Michael A. K. Liebschner, PhD, David L. Kopperdahl, PhD, William S. Rosenberg, MD, and Tony M. Keaveny, PhD

Quantification of 3D Left Ventricular Deformation using Hyperelastic Warping: Comparisons between MRI and PET Imaging by AI Veress, JA Weiss, GJ Klein, GT Gullberg

The Development of a Physically based Virtual Animal Model using Soft-tissue Parameter Testing by Cynthia Bruyns and Mark Ottensmeyer, from Proceeding (358) Computer Graphics and Imaging - 2002

Measurements of Soft-Tissue Mechanical Properties to Support Development of a Physically Based Virtual Animal Model by Cynthia Bruyns and Mark Ottensmeyer

Subject-specific finite element analysis of the human medial collateral ligament during valgus knee loading by John C. Gardiner and Jeffrey A. Weiss

THREE-DIMENSIONAL FINITE ELEMENT MODELING OF DILATED HUMAN ASCENDING AORTA by Ajay Bohra, Thoralf M. Sundt, and Ruth J. Okamoto

The Optic Nerve Head as a Biomechanical Structure: Initial Finite Element Modeling by Anthony J. Bellezza, Richard T. Hart, and Claude F. Burgoyne

Finite Element Analysis of an Implanted Human Tibia Under Normal Gait Loading by Irina Ionescu

Methodology and sensitivity studies for finite element modeling of the inferior glenohumeral ligament complex by Benjamin J. Ellisa, Richard E. Debskib, Susan M. Mooreb, Patrick J. McMahonc, Jeffrey A. Weiss in Journal of Biomechanics.

Finite Element Analysis of the Inferior Glenohumeral Ligament by Jeffrey A. Weiss, William J. Newman, and Richard E. Debski

A STRAIN MAP OF THE HUMAN DISTAL TIBIA DURING THE STANCE PHASE OF WALKING: A COMBINED APPROACH USING DYNAMIC CADAVER SIMULATIONS AND FINITE ELEMENT ANALYSES bu M.M. Peterman, P.R. Cavanagh, S.J. Piazza, H.J. Sommer, III, C.R. Jacobs, and N.A. Sharkey

Muskuloskelettale Belastungen: Beitrag zu den mechanischen Rahmenbedingungen der Frakturheilung by Dr.-Ing. Georg Norbert Duda

Strain Transfer between a CPC Coated Strain Gauge and Cortical Bone during Bending by Nicholas M. Cordaro, Jeffrey A. Weiss, and John A. Szivek

Bone Regeneration and Fracture Healing: Experience With Distraction Osteogenesis Model by Richards, Mark PhD, ; Goulet, James A. MD; Weiss, Jeffrey A. PhD; Waanders, Nicholas A. MD, PhD; Schaffler, Mitchell B. PhD; Goldstein, Steven A. PhD